Remove sweat, oil, lotion and powder from the contact area and inspect the product before use. Apply each side according to its category: center and smooth a cover, secure the lower part of a lift design before the upper part, or position push-up sides separately and adjust them inward. Fasten a clasp only where present. To remove, peel slowly from an edge and stop if uncomfortable.
Prepare clean, dry skin and inspect the product
Wash and dry the skin before wear. The contact area should be free from sweat, lotions, oils and powders. Inspect the product for damage, then confirm that the selected model and size match the intended appearance and comfort review.
Do not apply the product to broken, irritated or sunburned skin. The manual does not verify a universal wear time, skin-safety certification, waterproof performance or suitability for swimming.
Center cover models and smooth the edges
For a cover model, center the product over the nipple area, press gently and smooth the edges. YM02 and YM03 are non-adhesive: they rely on the silicone material's contact with the skin and require position checking during wear. Do not describe those two models as adhesive covers.
Secure the lower section of a lift design first
Position and secure the lower section first. Gently lift upward, secure the upper section and smooth the edges. Adjust for comfort and symmetry without excessively stretching the skin. This sequence does not establish a measurable lift amount or guarantee the same result across body shapes, sizes and techniques.
Apply push-up sides separately before adjusting inward
- Place each side separately. Check the left and right position before connecting or adjusting the product.
- Adjust inward. Bring the sides toward the intended position without forcing a tight fit.
- Fasten only the clasp supplied for that model. Not every product uses the same closure. YM05, YM17 and YM19 use plastic clasps; YM24 uses a metal clasp.
- Check comfort, fit and symmetry. Stop and reposition or discontinue use if the product causes discomfort.
Exact clasp grades are not confirmed. A catalog name or the phrase “push-up” does not prove a cup-size change, universal fit or measured lifting result.
Peel slowly from an edge
Start at an edge and peel away slowly and gently. Do not pull abruptly or tug at the skin. Stop if removal causes discomfort. Discontinue use for redness, itching or discomfort, and remove the product before sleeping.
After removal, follow the water-only cleaning and storage guide. Care instructions do not promise that reduced adhesion can be restored.
Approve instructions against the physical sample
- Identify the exact cover, lift or push-up model.
- Confirm the documented size label and adhesive or non-adhesive structure.
- Check whether a clasp is present and how the supplied sample operates.
- Review application, removal, warning and stop-use language together.
- Keep unsupported performance claims out of packaging artwork.
Buyers can compare catalog product formats, review model-specific size labels and send the selected model in an RFQ.
Evidence basis and limits
- TD YM01-YM24 Product Use & Care Manual, English edition V1.0, dated October 29, 2026 — sections 2–8 and 11.
- How Do Adhesive Bras Work? — construction context for cups, closures and placement.
This guide does not establish medical suitability, hypoallergenic status, skin-safety certification, universal fit, fixed wear duration, waterproof performance or a quantified lifting result.